Filter By:
Parts & Accessories
$2.95
Flexible Versatite™ mount for Dash, Zot, Dart, Hotrod, Hotshot Micro 2W, Hotshot Pro 200 (flexible mount version; not for Hotshot Pro 200C) systems. Compatible with most handlebars, seat posts, and seat stays including aero styles.
$3.00
Updated and more secure clothing clip for mounting CatEye safety lights.
$3.00
Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.
$3.59
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
$4.99
The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
$4.99
- Attaches to rear racks
- Compatible with: Blinky 3,5,7 and Superflash
- 25mm between each of the top horizontal holes (center to center)
- Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
$5.00
Mounting bracket for MSW front White Bat Headlight.
- Includes 1 front mounting bracket
$5.00
Replacement bracket for Pico and Tigermoth lights.
- Includes 1 front bracket, 1 rear bracket, and 2 mounting straps
$5.00
- Mounts Beamer and Blaze 1/2W lights to a helmet
- Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB
- Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet
$5.09
- Replacement mounting straps for Sunlite lights
- Choose specific model to fit your light
$5.95
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
$5.95
SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights
$5.99
- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights
- Fits 25.4 – 31.8mm handlebars
$6.00
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post.
- Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot.
- UV proof rubber strap
- Compatible with every PDW tail light except Asteroid and Fenderbot
$6.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works.
- Compatible with all PDW rear lights except the Asteroid and Fenderbot
- Horizontal holes are 50mm apart to fit European rack standards
- Vertical holes are 18mm apart to fit most reflector mounts
$6.99
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light
- Designed specifically for aero seat posts
- Adjustable light angle
- Easy on/easy off design makes for quick mounting and removal
$6.99
- Compatible with seatpost diameter 20mm-36mm
- Adjustable light angle
- Easy on/easy off design makes for quick mounting and removal
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light
$7.99
-Mounts easily to front racks with threaded M5 mounts
-Allows for unobstructed light positioning
-22.2mm clamping diameter
$8.99
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.
$9.95
Optional Accessory Saddle Rail Mount Bracket for most CatEye taillights.
$9.95
Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface.
- Compatible with Ranger, Expilion, Metro, and Streak series
- Includes adapter piece only
$9.99
Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.
$9.99
Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.
$9.99
This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).
$9.99
Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
$9.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm.
SYSTEM COMPATIBILITY
- Lumina Series
- MiNewt Cordless Series
- Mako Series
WARRANTY
- This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended.
System Compatibility:
- Lumina Series
- Mako Series
- MiNewt Cordless Series
$9.99
If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment.
SYSTEM COMPATIBILITY
- PRO Series
Not compatible with Lumina Pro lighting systems
Page 1 of 3
Next page